DREHMO i-matic

... with integrated control unit and non-intrusive setting and parameterisation

 

i-matic actuators are high-end sophisticated actuators. The actuators are operated via user interface with LC-display and push-buttons. They include c-matic functions and additionally programmable actuator functions and operating modes via remote and local settings, watchdog, electronic nameplate, datalogger as well as local valve diagnostics for predictive maintenance.

 

 

Features

  • valve attachment according to EN ISO 5210 or DIN 3210
  • Mains voltage 380 V - 420 V
  • DREHMO 3-phase AC squirrel cage motor, insulation class F, 3 thermoswitches
  • Short-time duty S2 - max. 15 min.
  • Combined sensor for limit and torque sensing
  • Controls:
    • Switchgear: Interlocked reversing contactors
    • Control: 24V DC, 3+1 potential-free and freely programmable command inputs
    • Status signals (programmable, potential free): 6 normally open contacts and 1 change-over digital output
  • Local controls:
    • 4 multi-function push buttons: Modes: LOCAL - OFF - REMOTE - LEARN
    • Menu Navigation: UP - ESCAPE - DOWN - ENTER, (lockable)
    • Operation: OPEN - STOP - CLOSE
    • Indication lights: 6 indication lights (colour coding programmable for 5): End position CLOSED, torque fault CLOSE, fault, torque fault OPEN, end position OPEN, Bluetooth (blue)
    • Interface: Bluethooth
  • Enclosure protection IP68 according to IEC 60529
  • Ambient temperature -25°C to +70°C
  • Corrosion protection K3
  • Colour RAL 5015 / sky blue
  • Handwheel for manual operation / without switch-over mechanism
  • Electrical connection: plug/socket connector with screw-type connection

Additional equipment

  • magnetic pin operation
  • electronic load relay (ELR)
  • external power supply
  • communication interfaces:
    • Profibus DPV0, V1, V2
    • Modubus RTU single line, redundant, Loop
    • Foundation Fieldbus H1
    • HART Protocol